The GENLINX™ GS9008 is a bipolar integrated circuit designed to drive two 75 Ω co-axial cables at data rates exceeding 400 Mb/s. It directly interfaces with other GENLINX™ devices and can a.
• two outputs, adjustable from 0 to 1100 mVp-p into 75 Ω loads
• nominal 600 ps rise and fall times
• accepts SMPTE and standard ECL input levels
• operates from a single +5 or -5 volt supply
• on-chip DC restoration for low jitter
• 170 mW power dissipation
• interfaces with GENLINX™ GS9002, GS9004A,
GS9005A and GS9015A
APPLICATIONS
• SMPTE 259M Serial Digital Systems (4:2:2 & 4ƒsc)
• Other Serial Digital Video Interfaces - 360 Mb/s
• General purpose high speed driver applications
PIN CONNECTIONS
OUTPUT 1 OUTPUT 1
VSET VREF
18
27
GS9008
36
45
VCC INPUT INPUT VEE
ORDERING INFORMATION
Part.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | GS9000 |
Gennum |
Serial Digital Decoder | |
2 | GS9000C |
Gennum |
Serial Digital Decoder | |
3 | GS9000D |
Gennum |
Serial Digital Decoder | |
4 | GS9001 |
Gennum |
EDH Coprocessor | |
5 | GS9007 |
Gennum |
Quad Serial Digital Cable Driver | |
6 | GS9008A |
Gennum |
Cable Driver | |
7 | GS9009 |
Gennum |
Cable Driver | |
8 | GS9010A |
Gennum |
Automatic Tuning Subsystem | |
9 | GS9015 |
Vishay |
Small Signal Transistors | |
10 | GS9015A |
Gennum |
Serial Digital Reclocker | |
11 | GS9020 |
Globaltech |
2A Sink/Source Bus Termination Regulator | |
12 | GS9020A |
GENNUM |
Serial Digital Video Input Processor |