iMac G5 Power Supply, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Online instructions are available at http://www.apple.com/support/doityourself/. Tools Required • Use the screwdriver provided, or a Phillips #1 screwdrive.
pening the Computer 1. Turn off your computer by choosing Shut Down from the Apple (K) menu. 2. Disconnect all cables, and unplug the power cord from your computer. 3. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of the computer and slowly lay the computer face down as shown. iMac G5 Power Supply, 20-inch - 3 4. Locate the three case screws circled below. You may have to lift the metal foot to locate the middle case screw. Note: These screws are captive; they are part of the display/bezel assembly and cannot be removed. 5. Using the tool provided, or a Phillips .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | G5001 |
Global Mixed-mode Technology |
300kHz DC-DC Step-Down PWM Controller | |
2 | G5010 |
Global Mixed-mode Technology |
Dual-Low On-Resistance Load Switch | |
3 | G5016 |
Global Mixed-mode Technology |
Dual Ultra-Low On-Resistance Load Switch | |
4 | G5017 |
Global Mixed-mode Technology |
low ON resistance (Ron) load switches | |
5 | G501DS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
6 | G501VS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
7 | G502DS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
8 | G502VS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
9 | G504DS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
10 | G504VS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
11 | G506DS |
Jingdao |
GLASS PASSIVATED RECTIFIERS | |
12 | G506VS |
Jingdao |
GLASS PASSIVATED RECTIFIERS |