strings configurable in external EEPROM over the USB interface. Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate. Low operating and USB suspend current. UHCI/OHCI/EHCI host controller compatible. USB Bulk data transfer mode (512 byte packets in HiSpeed mode). +1.2V (chip core) and +3.3V I/O interfacing (+5V Tolerant). Extended -40°C to 85°C .
Supports PD Specification 3.0.
2 USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink
mode with charging function through to Port 1 (FT233HPQ and FT233HPL only).
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with
8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy
through I2C interface.
Up to 8 Configurable PD GPIO pins.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | FT230X |
FTDI |
USB to BASIC UART | |
2 | FT230XQ-R |
FTDI |
USB to BASIC UART | |
3 | FT230XQ-xxxx |
FTDI |
USB to BASIC UART | |
4 | FT230XS-xxxx |
FTDI |
USB to BASIC UART | |
5 | FT231X |
FTDI |
USB TO FULL HANDSHAKE UART | |
6 | FT231XQ |
FTDI |
USB TO FULL HANDSHAKE UART | |
7 | FT231XS |
FTDI |
USB TO FULL HANDSHAKE UART | |
8 | FT232BL |
Future Technology Devices |
USB UART | |
9 | FT232BM |
FTDI |
USB UART | |
10 | FT232BQ |
Future Technology Devices |
USB UART | |
11 | FT232H |
Future Technology Devices |
Single Channel Hi-Speed USB to Multipurpose UART/FIFO | |
12 | FT232HL |
FTDI |
Single Channel Hi-Speed USB to Multipurpose UART/FIFO |