The M3 series (E100) of VCO (Voltage Controlled Oscillator) apply to the frequency range 70-300 MHz. The M3 series uses a single lithium tantalate piezoelectric crystal (LiTaO3) that has large electromechanical coupling coefficient, and a unique SAW resonator. That provides wide bandwidths, and exceptional stability in VHF band until 300MHz. s FEATURES • • .
•
•
•
•
•
•
• Frequency range: 70 to 300MHz Wide frequency controllable range: Over than ±1600 ppm (0.5 to 4.5 V) Excellent temperature stability: ±200 ppm or less (-10 to 70 °C) No adjustment is required due to high accuracy oscillation frequency (±300 ppm or less) Highly reliable hermetically sealed package High carrier noise ratio: -90dB or less (Detuning;12.5kHz, bandwidth; 8kHz) Small type, and compatible with 8-pin DIP IC
s PACKAGE
M3 Series (E100)
s PIN ASSIGNMENT
(Bottom View)
1
4
8
5
s PIN DESCRIPTIONS
Pin No. 1 4 5 8 Symbol VIN GND Pout VCC Input (Control voltage) Ground Outp.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | FAR-M2CC |
Fujitsu Media Devices Limited |
Piezoelectric VCO (6 to 30 MHz) | |
2 | FAR-M2DB |
Fujitsu Media Devices Limited |
Piezoelectric VCO (4 to 30 MHz) | |
3 | FAR-M2SC |
Fujitsu Media Devices Limited |
Piezo Electric VCO | |
4 | FAR-2807 |
FURUNO |
OPERATOR MANUAL | |
5 | FAR-C3C |
Fujitsu Media Devices Limited |
Piezoelectric Resonator (4 to 20 MHz) | |
6 | FAR-C4C |
Fujitsu Media Devices Limited |
Piezoelectric Resonator (4 to 16 MHz) | |
7 | FAR-C4CL |
Fujitsu Media Devices Limited |
Piezoelectric Resonator (24 to 40 MHz) | |
8 | FAR-C4CN |
Fujitsu Media Devices Limited |
Piezoelectric Resonator (4 to 23.9 MHz) | |
9 | FAR-C7 |
Fujitsu Media Devices |
FAR Resonators | |
10 | FAR-D5CC |
Fujitsu Media Devices Limited |
SAW Duplexer (700 to 1000 MHz) | |
11 | FAR-F1DA |
Fujitsu Media Devices Limited |
TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz) | |
12 | FAR-F4DA |
Fujitsu Media Devices Limited |
TIMING EXTRACTION FILTER (50 to 300MHz) |