These devices are specifically designed as receiver circuits for the phototransistor signals available in some optical encoders. Connect the emitters of the phototransistors to the input pins, with the collectors connected to Vcc. The inputs have 330 ohm resistors to terminate the phototransistors in an emitter follower mode. Differential inputs enhance nois.
• Supply Voltage Range 4.5V to 30V
• Designed for phototransistor inputs
• Ungated index channel
• Current sink for LED drive (see application note
APP-D2)
• Outputs short circuit protected
• 25mA peak drive current
APPLICATIONS
• Optical Encoders
• Industrial Controls
ET9561
DESCRIPTION
These devices are specifically designed as receiver circuits for the phototransistor signals available in some optical encoders. Connect the emitters of the phototransistors to the input pins, with the collectors connected to Vcc. The inputs have 330 ohm resistors to terminate the phototransistors in an emit.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ET9560 |
ETIC |
3 CHANNEL DIFFERENTIAL AMPLIFIER-COMPARATOR | |
2 | ET9501 |
Etek Microelectronics |
Single Lithium-Ion or Lithium-Polymer cell linear battery charger | |
3 | ET9510A |
Etek Microelectronics |
Lithium battery mobile power integrated control IC | |
4 | ET9510B |
Etek Microelectronics |
Lithium battery mobile power integrated control IC | |
5 | ET9518 |
Etek Microelectronics |
1.5A Rechargeable lithium battery protection circuit | |
6 | ET9570LH |
IC Haus |
3-Ch. Diff. Amplifier-comparator | |
7 | ET9571 |
IC Haus |
3-Ch. Diff. Amplifier-comparator | |
8 | ET9000 |
ETEQ |
486 WRITE BACK CACHE AT SINGLE CHIP | |
9 | ET9235 |
Etek Microelectronics |
Optimum CMOS IC | |
10 | ET9260 |
Etek Microelectronics |
Optimum CMOS | |
11 | ET9364 |
Etek Microelectronics |
High performance white LED driver | |
12 | ET9366 |
Etek Microelectronics |
Constant frequency charge pump DC/DC converter |