about ADC’s offset voltage 1. Modify stack level from 16 to 12 2. Modify program ROM size from 4K to 16K 3. Rename “eFH5830A” to eFH5830AA 4. Remove IDLE mode 5. Change AD channel from 8 to 4 6. Remove 17.9MHz main CLK 1.Rename from eFH5830AA to EM785830AA 1.6 Relative to EM785830AA’s ROM-less, OTP and mask: ROM-less ICE5830 OTP EM78P5830A EM78P5830AA Mask.
ference are list at next table: EM785830AA ADIS (code option) VERSEL (code option) PHO (code option) MS (IOCC page1 bit0) AD resolution Stack number Un-effect (4 channel only) Must = 0 Must = 0 Must = 1 10 bit 12 EM78P5830A EM78P5830AA Un-effect (4 channel only) Un-effect Un-effect Must = 1 8 bit 16 Un-effect (4 channel only) Must = 0 Must = 0 Un-effect 10 bit 16 User Application Note (Before using this chip, take a look at the following description note, it includes important messages.) 1. There are some undefined bits in the registers. The values in these bits are unpredicted. These bits .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | EM78P5840 |
ELAN Microelectronics |
(EM78P5840 - EM78P5842) 8 BIT MICROCONTROLLER | |
2 | EM78P5840N |
ELAN Microelectronics |
(EM78P5840N - EM78P5842N) 8-Bit Microcontrollers | |
3 | EM78P5841 |
ELAN Microelectronics |
(EM78P5840 - EM78P5842) 8 BIT MICROCONTROLLER | |
4 | EM78P5841N |
ELAN Microelectronics |
(EM78P5840N - EM78P5842N) 8-Bit Microcontrollers | |
5 | EM78P5842 |
ELAN Microelectronics |
(EM78P5840 - EM78P5842) 8 BIT MICROCONTROLLER | |
6 | EM78P5842N |
ELAN Microelectronics |
(EM78P5840N - EM78P5842N) 8-Bit Microcontrollers | |
7 | EM78P507N |
ELAN Microelectronics |
8-Bit Microcontroller | |
8 | EM78P510N |
ELAN Microelectronics |
8-Bit Microprocessor | |
9 | EM78P516N |
ELAN Microelectronics |
8-Bit Microcontroller | |
10 | EM78P520N |
ELAN Microelectronics |
8-Bit Microcontroller | |
11 | EM78P528N |
ELAN Microelectronics |
8-Bit Microcontroller | |
12 | EM78P567 |
ELAN Microelectronics |
8-BIT OTP MICRO-CONTROLLER |