EL2257C/EL2357C EL2257C/EL2357C 125 MHz Single Supply, Clamping Op Amps Features • Specified for +3V, +5V, or ± 5V Applications • Power Down to 0 µA • Output Voltage Clamp • Large Input Common Mode Range 0V < VCM < VS - 1.2V • Output Swings to Ground Without Saturating • -3 dB Bandwidth = 125 MHz • ± 0.1 dB Bandwidth = 30 MHz • Low Supply Current = 5 mA •.
• Specified for +3V, +5V, or ± 5V Applications
• Power Down to 0 µA
• Output Voltage Clamp
• Large Input Common Mode Range
0V < VCM < VS - 1.2V
• Output Swings to Ground Without
Saturating
• -3 dB Bandwidth = 125 MHz
• ± 0.1 dB Bandwidth = 30 MHz
• Low Supply Current = 5 mA
• Slew Rate = 275 V/µs
• Low Offset Voltage = 4 mV max
• Output Current = ±100 mA
• High Open Loop Gain = 80 dB
• Differential Gain = 0.05%
• Differential Phase = 0.05°
Applications
• Video Amplifier
• PCMCIA Applications
• A/D Driver
• Line Driver
• Portable Computers
• High Speed Communications
• RGB Printer, FAX, Scan.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | EL2310C |
Elantec Semiconductor |
Low Cost/ Dual/ Triple and Quad Video Op Amps | |
2 | EL2311C |
Elantec Semiconductor |
Low Cost/ Dual/ Triple and Quad Video Op Amps | |
3 | EL2360C |
Elantec Semiconductor |
Triple 130 MHz Current Feedback Amplifier | |
4 | EL2386C |
Elantec Semiconductor |
250 MHz Triple Current Feedback Amp w/Disable | |
5 | EL23G |
KODENSHI KOREA CORP |
Infrared Emitting Diodes(GaAs) | |
6 | EL2 |
ETC |
Endpenthode | |
7 | EL2 |
Philips |
Penthode Bindlamp | |
8 | EL2 |
Philips |
Output Pentode | |
9 | EL2001 |
Intersil |
70MHz Buffer Amplifier | |
10 | EL2001C |
Elantec |
Low Power/ 70 MHz Buffer Amplifier | |
11 | EL2002 |
Intersil |
180MHz Buffer Amplifier | |
12 | EL2002C |
Elantec |
Low Power/ 180 MHz Buffer Amplifier |