The EL2082 is a general purpose variable gain control building block built using an advanced proprietary complementary bipolar process It is a two-quandrant multiplier so that zero or negative control voltages do not allow signal feedthrough and very high attenuation is possible The EL2082 works in current mode rather than voltage mode so that the input impe.
Flexible inputs and outputs all ground referred 150 MHz large and small-signal bandwidth 46 dB of calibrated gain control range 70 dB isolation in disable mode 10 MHz 0 15% diff gain and 0 05 diff phase performance at NTSC using application circuit Operates on g5V to g15V power supplies Outputs may be paralleled to function as a multiplexer Applications Level adjust for video signals Video faders and mixers Signal routing multiplexers Variable active filters Video monitor contrast control AGC Receiver IF gain control Modulation demodulation General ‘‘cold’’ fro.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | EL2082 |
Renesas |
Current-Mode Multiplier | |
2 | EL2082 |
Intersil |
Current-Mode Multiplier | |
3 | EL208 |
Everlight |
8 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER | |
4 | EL2001 |
Intersil |
70MHz Buffer Amplifier | |
5 | EL2001C |
Elantec |
Low Power/ 70 MHz Buffer Amplifier | |
6 | EL2002 |
Intersil |
180MHz Buffer Amplifier | |
7 | EL2002C |
Elantec |
Low Power/ 180 MHz Buffer Amplifier | |
8 | EL2003 |
Intersil |
100MHz Video Line Driver | |
9 | EL2003C |
Elantec |
100MHz Video Line Driver | |
10 | EL2004 |
Elantec |
350 MHz FET Buffer | |
11 | EL2004C |
Elantec |
350MHz FET Buffer | |
12 | EL2005 |
Elantec |
High Accuracy Fast Buffer |