The DS4303 is a nonvolatile (NV) sample and infinitehold adjustable voltage reference. The reference voltage is programmed in-circuit during factory calibration/ programming. Programming the reference voltage, VOUT, is as simple as applying the desired voltage on VIN and toggling the adjust pin (ADJ) to lock the VOUT voltage level indefinitely, even if the d.
♦ Precise Electronically Adjustable Voltage Reference ♦ Enables Automated Factory Trimming of Devices Needing Voltage Adjustment ♦ Can be Adjusted to Within ±1mV ♦ Wide Adjustable Output Voltage Range Within 300mV of the Supply Rails ♦ Low Temperature Coefficient ♦ ±1mA of Output-Current Drive ♦ NV Memory Stores the Voltage Indefinitely ♦ Output Short-Circuit Protection ♦ Low Cost ♦ Low Power Consumption ♦ 2.4V to 3.6V Single-Supply Operation ♦ Small 5-Lead SOT23 Package DS4303 Applications Power-Supply Calibration Threshold Setting Offset Nulling Bias Adjusting Power Amps Pressure Bridges F.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS4301 |
Dallas Semiconducotr |
Nonvolatile/ 32-Position Digital Potentiometer | |
2 | DS4302 |
Maxim Integrated Products |
2-Wire/ 5-Bit DAC with Three Digital Outputs | |
3 | DS4311 |
Maxim Integrated Products |
(DS4xxx) DS4-XO Series Crystal Oscillators | |
4 | DS4312 |
Maxim Integrated Products |
(DS4xxx) DS4-XO Series Crystal Oscillators | |
5 | DS4000 |
Dallas Semiconducotr |
Digitally Controlled TCXO | |
6 | DS4025 |
Mitel Networks Corporation |
240.192MHz IF SAW Filter Advance Information | |
7 | DS402ST |
Dynex Semiconductor |
Rectifier Diode | |
8 | DS402ST09 |
Dynex Semiconductor |
Rectifier Diode | |
9 | DS402ST10 |
Dynex Semiconductor |
Rectifier Diode | |
10 | DS402ST11 |
Dynex Semiconductor |
Rectifier Diode | |
11 | DS402ST12 |
Dynex Semiconductor |
Rectifier Diode | |
12 | DS402ST13 |
Dynex Semiconductor |
Rectifier Diode |