Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The DS26F31M is a quad differential line driver designed for digital data transmission over balanced lines. The DS26F31M meets all the requirements of EIA Standard RS422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines. The DS26F31M offers improved performance due to the use .
lower power, extended temperature range, and improved specifications. The circuit provides an enable and disable function common to all four drivers. The DS26F31M features TRI-STATE ® outputs and logical OR-ed complementary enable inputs. The inputs are all LS compatible and are all one unit load. The DS26F31M offers optimum performance when used with the DS26F32 Quad Differential Line Receiver. Features n n n n n Operation from single +5.0V supply Outputs won’t load line when VCC = 0V Output short circuit protection Meets the requirements of EIA standard RS-422 High output drive capability f.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | DS26F31MQML-SP |
ETCTI |
DS26F31MQML Quad High Speed Differential Line Drivers (Rev. A) |
|
| 2 | DS26F31M |
National Semiconductor |
Quad High Speed Differential Line Drivers |
|
| 3 | DS26F32M |
National Semiconductor |
Quad Differential Line Receivers |
|
| 4 | DS26F32M |
ETCTI |
DS26F32M Quad Differential Line Receivers (Rev. C) |
|
| 5 | DS26F32MQML |
ETCTI |
DS26F32MQML Quad Differential Line Receivers (Rev. A) |
|
| 6 | DS26F32MQML |
National Semiconductor |
Quad Differential Line Receivers |
|
| 7 | DS2604 |
Toshiba Semiconductor |
NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITCHING/ HAMMER DRIVE/ PULSE MOTOR DRIVE APPLICATIONS) |
|
| 8 | DS26101 |
Maxim Integrated Products |
8-Port TDM-to-ATM PHY |
|
| 9 | DS26102 |
Maxim Integrated Products |
16-Port TDM-to-ATM PHY |
|
| 10 | DS26303 |
Maxim Integrated Products |
Octal Line Interface Unit |
|
| 11 | DS26324 |
Dallas Semiconductor |
E1/T1/J1 Short-Haul Line Interface Unit |
|
| 12 | DS26334 |
Dallas Semiconductor |
E1/T1/J1 Shortand Long-Haul Line Interface Unit |
|
