The DS2431 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually be write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. The DS2431.
●
● Easily Add Traceability and Relevant Information to Any Individual System
• 1024 Bits of EEPROM Memory Partitioned Into Four Pages of 256 Bits
• Individual Memory Pages Can Be Permanently Write Protected or Put in EPROM-Emulation Mode (Write to 0)
• Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
●
● Minimalist 1-Wire Interface Lowers Cost and Interface Complexity
• IEC 1000-4-2 Level 4 ESD Protection (±8kV Contact, ±15kV Air, typ)
• Reads and Writes Over a Wide Voltage Range from 2.8V to 5.25V from -40°C to +85°C
• Communicates to Host with a Sing.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS2430 |
Dallas Semiconducotr |
256-Bit 1-Wire EEPROM | |
2 | DS2430A |
Maxim Integrated |
256-Bit 1-Wire EEPROM | |
3 | DS2431-A1 |
Maxim Integrated |
1-Wire EEPROM | |
4 | DS2432 |
Maxim Integrated |
1Kb Protected 1-Wire EEPROM | |
5 | DS2433 |
Maxim Integrated |
4Kb 1-Wire EEPROM | |
6 | DS2433-Z01 |
Dallas Semiconducotr |
4K-Bit 1-Wire EEPROM | |
7 | DS2434 |
Dallas Semiconducotr |
Battery Identification Chip | |
8 | DS2435 |
Dallas Semiconducotr |
Battery Identification Chip with Time/Temperature Histogram | |
9 | DS2436 |
Maxim Integrated |
Battery ID/Monitor Chip | |
10 | DS2437 |
Dallas Semiconducotr |
Smart Battery Monitor | |
11 | DS2438 |
Maxim Integrated |
Smart Battery Monitor | |
12 | DS2401 |
Maxim Integrated |
Silicon Serial Number |