The DS2180A is a monolithic CMOS device designed to implement primary rate (1.544 MHz) T-carrier transmission systems. The 193S framing mode is intended to support existing Ft/Fs applications (12 frames/superframe). The 193E framing mode supports the extended superframe format (24 frames/superframe). Clear channel capability is provided by selection of appro.
Single chip DS1 rate transceiver Supports common framing standards
– 12 frames/superframe “193S”
– 24 frames/superframe “193E” Three zero suppression modes
– B7 stuffing
– B8ZS
– Transparent Simple serial interface used for configuration, control and status monitoring in “processor” mode =“Hardware” mode requires no host processor; intended for stand-alone applications Selectable 0, 2, 4, 16 state robbed bit signaling modes Allows mix of “clear” and “non-clear” DS0 channels on same DS1 link Alarm generation and detection Receive error detection and counting for transmission performance monitor.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS2181A |
Dallas Semiconducotr |
CEPT Primary Rate Transceiver | |
2 | DS2182A |
Maxim Integrated |
T1-Line Monitor-Chip | |
3 | DS2182A |
Dallas Semiconducotr |
T1 Line Monitor | |
4 | DS2186 |
Dallas Semiconducotr |
Transmit Line Interface | |
5 | DS2187 |
Dallas Semiconducotr |
Receive Line Interface | |
6 | DS2188 |
Dallas Semiconducotr |
T1/CEPT Jitter Attenuator | |
7 | DS21054E |
Microchip Technology |
16K 1.8V I2C SERIAL EEPROM | |
8 | DS2106SY |
Dynex Semiconductor |
Rectifier Diode | |
9 | DS2107SY |
Dynex Semiconductor |
Rectifier Diode | |
10 | DS2108 |
Dallas Semiconducotr |
Differential SCSI Switchable Terminator | |
11 | DS210W |
AiT Components |
SCHOTTKY BARRIER RECTIFIERS | |
12 | DS210W |
Jingdao Microelectronics |
Surface Mount Schottky Barrier Rectifier |