The DS21600/DS21602/DS21604 are multiple-rate clock adapters that convert between E-carrier and Tcarrier clocks rates. A T1 or E1 clock output, CLKOUT1, is available, along with a higher multiple rate clock output, CLKOUT2. CLKOUT1 and CLKOUT2 are frequency locked to the clock input CLKIN. The clock outputs, along with frame-sync output, can be phase-aligned.
§ § § § § § § § § § Direct Drop-In Replacement for LXP600ASE, LXP602SE, and LXP604SE Converts E-Carrier Clock Rates to T-Carrier Clock Rates Converts T-Carrier Clock Rates to E-Carrier Clock Rates 3.3V or 5V Supply Low Jitter Output Multiple Output Clocks Synchronized to Input Clock 8kHz Frequency-Locked Output for All Operation Modes No External Components Required 16-Pin SO and 8-Pin DIP Industrial Temperature Range: -40°C to +85°C ORDERING INFORMATION PART DS21600SN DS21600N DS21602SN DS21602N DS21604SN DS21604N TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C t.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS21600 |
Maxim Integrated Products |
(DS21600 - DS21604) 3.3V/5V Clock Rate Adapter | |
2 | DS21604 |
Maxim Integrated Products |
(DS21600 - DS21604) 3.3V/5V Clock Rate Adapter | |
3 | DS21610 |
Dallas Semiconducotr |
3.3V/5V Clock Rate Adapter | |
4 | DS2164Q |
Dallas Semiconducotr |
G.726 ADPCM Processor | |
5 | DS2165 |
Dallas Semiconducotr |
16/24/32Kbps ADPCM Processor | |
6 | DS2165Q |
Dallas Semiconducotr |
16/24/32kbps ADPCM Processor | |
7 | DS2167 |
Dallas Semiconducotr |
(DS2167 / DS2168) ADPCM Processor | |
8 | DS2168 |
Dallas Semiconducotr |
(DS2167 / DS2168) ADPCM Processor | |
9 | DS2169 |
Microsemi |
RTAX-S/SL and RTAX-DSP Radiation-Tolerant FPGAs | |
10 | DS21054E |
Microchip Technology |
16K 1.8V I2C SERIAL EEPROM | |
11 | DS2106SY |
Dynex Semiconductor |
Rectifier Diode | |
12 | DS2107SY |
Dynex Semiconductor |
Rectifier Diode |