VCCI VCCO VBAT - Power Supply Input - SRAM Power Supply Output - Backup Battery Input CEI - Chip Enable Input CEO TOL BW - Chip Enable Output - VCC Tolerance Select - Battery Warning Output (Open Drain) RST GND NC - Reset Output (Open Drain) - Ground - No Connection DESCRIPTION The DS1314 Nonvolatile Controller with Battery Monitor is a CMOS circuit .
Converts CMOS SRAM into nonvolatile memory
Unconditionally write-protects SRAM when VCC is out of tolerance
Automatically switches to battery backup supply when VCC power failure occurs
Monitors voltage of a lithium cell and provides advanced warning of impending battery failure
Signals low-battery condition on active low Battery Warning output signal
Automatic VCC power-fail detection for 3.0V or 3.3V power supplies
Space-saving 8-pin DIP and SOIC packages
Optional 16-pin SOIC and 20-pin TSSOP
versions reset processor when power failure occurs and hold processor in reset durin.
The DS1314 Nonvolatile Controller with Battery Monitor is a CMOS circuit which solves the application problem of convert.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS1312 |
Maxim Integrated |
Nonvolatile Controller | |
2 | DS1315 |
Maxim Integrated |
Phantom Time | |
3 | DS1318 |
Maxim Integrated |
Parallel-Interface Elapsed Time Counter | |
4 | DS1300-3 |
Emerson |
AC-DC / Distributed Power Front-End 2U | |
5 | DS1302 |
Maxim Integrated |
Trickle-Charge Timekeeping Chip | |
6 | DS1302 |
TGS |
Trickle Charge Timekeeping Chip | |
7 | DS1305 |
Maxim Integrated |
Serial Alarm Real-Time Clock | |
8 | DS1306 |
Maxim Integrated |
Serial Alarm Real-Time Clock | |
9 | DS1307 |
TGS |
64 X 8 Serial Real Time Clock | |
10 | DS1307 |
Maxim |
Real-Time Clock | |
11 | DS1308 |
Maxim Integrated |
Low-Current I2C RTC | |
12 | DS1321 |
Maxim Integrated |
Flexible Nonvolatile Controller |