The DRV110 device is a PWM current controller for solenoids. The device is designed to regulate the current with a well-controlled waveform to reduce power dissipation. The solenoid current is ramped up fast to ensure opening of the valve or relay. After initial ramping, the solenoid current is kept at a peak value to ensure correct operation, after which th.
•1 Internal Zener Diode on Supply Pin for HighVoltage Operation
– 120- and 230-V AC Supply Through Rectifier and RS Resistor
– 24-V, 48-V, and Higher DC Supply Through RS Resistor
• Drives an External MOSFET With PWM to Control Solenoid Current
– External Sense Resistor for Regulating Solenoid Current
• Fast Ramp-Up of Solenoid Current to Ensure Activation
• Solenoid Current is Reduced in Hold Mode for Lower Power and Thermal Dissipation
• Ramp Peak Current, Keep Time at Peak Current, Hold Current, and PWM Clock Frequency Can Be Set Externally. They Can Also Be Operated at Nominal Values Witho.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV1100 |
Burr-Brown Corporation |
HIGH POWER DIFFERENTIAL DRIVER AMPLIFIER | |
2 | DRV1101 |
Burr-Brown Corporation |
HIGH POWER DIFFERENTIAL LINE DRIVER | |
3 | DRV11873 |
Texas Instruments |
Sensorless BLDC Motor Driver | |
4 | DRV101 |
Burr-Brown Corporation |
PWM SOLENOID/VALVE DRIVER | |
5 | DRV102 |
Burr-Brown Corporation |
PWM SOLENOID/VALVE DRIVER | |
6 | DRV103 |
Burr-Brown Corporation |
PWM LOW-SIDE DRIVER | |
7 | DRV104 |
Burr-Brown Corporation |
1.2A PWM High-Side Driver | |
8 | DRV10866 |
Texas Instruments |
Sensorless BLDC Motor Driver | |
9 | DRV10963 |
Texas Instruments |
Sensorless BLDC Motor Driver | |
10 | DRV10964 |
Texas Instruments |
Three-Phase Sinusoidal Sensorless BLDC Motor Driver | |
11 | DRV10970 |
Texas Instruments |
3-Phase Brushless DC Motor Driver | |
12 | DRV10974 |
Texas Instruments |
12-V 3-Phase Sensorless BLDC Motor Driver |