Dynex offers a range of standard clamps designed to accommodate press pack semiconductors with tie rod centres from 75mm to 210mm and clamping force from 5kN to 138kN. The set clamps use Disc Springs to DIN 2092/2093 to apply the clamping force over a wide temperature range. The clamps also incorporate pressure indicators to make installation simple. Isolati.
35 35 26.5
ORDERING INFORMATION
Example Part Number:
DC210/120/200/R
DC210
– Clamp Series
This is a Dynex clamp with tie rod centres of 210mm
120
– Clamping Force
This is the required clamping force of the semiconductor device in kN
200
– Dimension ‘Y’ (see figure 2)
This is the total distance of all the parts to be clamped, plus the bottom reaction bar if fitted
R
– Bottom Reaction Bar fitted (optional)
If using a heatsink of suitable strength and stiffness the bottom reaction bar is not necessary, and the ‘R’ can be omitted from the part number
Figure 1: Clamp General Assembly
www.dynexs.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DC21 |
AMI |
CMOS Gate Array | |
2 | DC2100A05 |
Yantel |
Directional Coupler | |
3 | DC2100A10 |
Yantel |
Directional Coupler | |
4 | DC2100A20 |
Yantel |
Directional Coupler | |
5 | DC2100A30 |
Yantel |
Directional Coupler | |
6 | DC2100P05 |
Yantel |
Directional Coupler | |
7 | DC2100P10 |
Yantel |
Directional Coupler | |
8 | DC2100P18 |
Yantel |
Directional Coupler | |
9 | DC2100P20 |
Yantel |
Directional Coupler | |
10 | DC2000 |
Honeywell |
Controller Manual | |
11 | DC2001 |
Honeywell |
Controller Manual | |
12 | DC2003 |
Honeywell |
Controller Manual |