A resistive divider from the auxiliary winding to this pin sets the OPP compensation level. This pin offers an over−voltage protection input. Wiring a capacitor to ground helps selecting the timer duration. This pin offers a way to adjust the frequency modulation pace. By connecting a resistor to ground, it becomes possible to reduce the level at which frequ.
the device takes advantage of the auxiliary winding negative swing to let the user adjust the maximum power the converter can deliver in high line conditions (OPP). When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically freezes the peak current and reduces its switching frequency down to 25 kHz. At this point, if further output power reduction occurs, the controller enters skip−cycle. The DAP018X features an efficient protective circuitry which, in presence of an overcurrent condition, disables the output pulses while the device ente.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DAP018A |
ON Semiconductor |
PWM Current-Mode Controller | |
2 | DAP018B |
ON Semiconductor |
PWM Current-Mode Controller | |
3 | DAP018C |
ON Semiconductor |
PWM Current-Mode Controller | |
4 | DAP018D |
ON Semiconductor |
PWM Current-Mode Controller | |
5 | DAP011 |
ON Semiconductor |
PWM Controller | |
6 | DAP011C |
ON Semiconductor |
PWM Controller | |
7 | DAP002 |
STMicroelectronics |
PRIMARY CONTROLLER | |
8 | DAP005 |
STMicroelectronics |
Advanced transition-mode PFC controller | |
9 | DAP006 |
ON Semiconductor |
PWM Controller | |
10 | DAP008 |
ON Semiconductor |
PWM Current-Mode Controller | |
11 | DAP00xx |
Aeroflex |
Attenuators / Digital High Reliablity | |
12 | DAP07 |
Morethanall |
CONNECTOR |