The DAC1008D750 is a high-speed 10-bit dual channel Digital-to-Analog Converter (DAC) with selectable 2×, 4× or 8× interpolating filters optimized for multi-carrier WCDMA transmitters. Because of its digital on-chip modulation, the DAC1008D750 allows the complex pattern provided through lane 0, lane 1, lane 2 and lane 3, to be converted up from baseband to I.
Dual 10-bit resolution 750 Msps maximum update rate Selectable 2×, 4× or 8× interpolation filters Input data rate up to 312.5 Msps Very low-noise cap-free integrated PLL 32-bit programmable NCO frequency Four JESD204A serial input lanes 1.8 V and 3.3 V power supplies LVDS compatible clock inputs IMD3: 76 dBc; fs = 737.28 Msps; fo = 140 MHz ACPR: 64 dBc; two carriers WCDMA; fs = 737.28 Msps; fo = 153.6 MHz Typical 1.26 W power dissipation at 4× interpolation, PLL off and 740 Msps Power-down mode and Sleep modes Differential scalable output current from 1.6 mA to 22 m.
The DAC1008D750 is a high-speed 10-bit dual channel Digital-to-Analog Converter (DAC) with selectable 2, 4 or 8 inter.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DAC1008D650 |
IDT |
Dual 10-bit DAC | |
2 | DAC1008D650 |
NXP Semiconductors |
Dual 10-bit DAC | |
3 | DAC1008 |
National Semiconductor |
P Compatible/ Double-Buffered D to A Converters | |
4 | DAC100 |
Analog Devices |
10-Bit Current Output D/A Converter | |
5 | DAC1000 |
National Semiconductor |
DOUBLE-BUFFERED D-A CONVERTERS | |
6 | DAC1001 |
National Semiconductor |
DOUBLE-BUFFERED D-A CONVERTERS | |
7 | DAC1002 |
National Semiconductor |
DOUBLE-BUFFERED D-A CONVERTERS | |
8 | DAC1003D160 |
IDT |
Dual 10-bit DAC | |
9 | DAC1003D160 |
NXP Semiconductors |
Dual 10 bits DAC | |
10 | DAC1005D750 |
IDT |
Dual 10-bit DAC | |
11 | DAC1006 |
National Semiconductor |
P Compatible/ Double-Buffered D to A Converters | |
12 | DAC1007 |
National Semiconductor |
P Compatible/ Double-Buffered D to A Converters |