µPD17215, 17216, 17217, 17218 (hereafter called µPD17215 subseries) are 4-bit single-chip microcontrollers for small general-purpose infrared remote control transmitters. It employs a 17K architecture of general-purpose register type devices for the CPU, and can directly execute operations between memories instead of the conventional method of executing oper.
• Infrared remote controller carrier generator circuit (REM output)
• 17K architecture: General-purpose register system
• Program memory (ROM), Data memory (RAM)
µPD17215
Program memory (ROM) 4 K bytes (2048 × 16) Data memory (RAM)
µPD17216
8 K bytes (4096 × 16)
µPD17217
12 K bytes (6144 × 16)
µPD17218
16 K bytes (8192 × 16)
111 × 4 bits
223 × 4 bits
• 8-bit timer
:
1 channel
• Basic internal timer / Watchdog timer: 1 channel (WDOUT output)
• Instruction execution time (can be changed in two steps) at fX 4 MHz at fX 8 MHz
• External interrupt pin (INT)
• I/O pins
• Supply voltage : :.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | D1721C-xxBS20 |
OKI electronic componets |
1Mbit-Word x 72-Bit DRAM | |
2 | D1721NH |
Infineon |
Crow Bar Diode | |
3 | D1722 |
Sanyo |
2SD1722 | |
4 | D1723 |
Sanyo |
2SD1723 | |
5 | D1723GF |
NEC |
UPD1723GF | |
6 | D1723GF |
NEC |
UPD1723GF | |
7 | D1724 |
Sanyo |
2SD1724 | |
8 | D1725 |
Sanyo Semicon Device |
2SD1725 | |
9 | D1729 |
SavantIC |
2SD1729 | |
10 | D17006 |
NEC |
UPD17006 | |
11 | D17006AGF-011 |
NEC |
UPD17006AGF-011 | |
12 | D1702 |
Renesas |
2SD1702 |