The CXA1511L/M is a bipolar IC used for preamplifiers that receive signals in infrared remote control systems. These ICs consist of a first-stage amplifier, limiter amplifier, band-pass filter, band elimination filter, signal waveform detection circuit and waveform shaping circuit. Features • Low power consumption (VCC = 5V, 9mW typ.) • Low supply voltage (V.
• Low power consumption (VCC = 5V, 9mW typ.)
• Low supply voltage (VCC = 5V)
• Filters (center frequency can be varied through external resistor: fo = 30kHz to 60kHz, 40kHz typ.)
• Elimination of inductors prevents magnetic field inductance interference.
• Optical reception diode can be coupled directly.
• Collector output (pull-up resistor, TTL and CMOS can be connected directly) Applications TVs, VCRs, audio equipment Structure Bipolar silicon monolithic IC Block Diagram and Pin Configuration 8 pin SIP (Plastic) 8 pin SOP (Plastic)
Absolute Maximum Ratings 7 V
• Supply voltage VCC
• Operati.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CXA1511M |
Sony Corporation |
Preamplifier for Remote Control Signal Reception | |
2 | CXA1510 |
CREE |
LED | |
3 | CXA1512 |
Cree |
LED | |
4 | CXA1512M |
Sony Corporation |
MOTOR SENSOR AMPLIFIER FOR 8 mm CAMCORDER | |
5 | CXA1512N |
Sony Corporation |
MOTOR SENSOR AMPLIFIER FOR 8 mm CAMCORDER | |
6 | CXA1518Q |
Sony Corporation |
EIAJ Sound Multiplexing Decoder | |
7 | CXA1518S |
Sony Corporation |
EIAJ Sound Multiplexing Decoder | |
8 | CXA1507 |
Cree |
LED | |
9 | CXA1520 |
CREE |
LED | |
10 | CXA1522M |
Sony |
Stereo Power Amplifier | |
11 | CXA1522N |
Sony |
Stereo Power Amplifier | |
12 | CXA1522P |
Sony |
Stereo Power Amplifier |