The CMD229 is a broadband MMIC low noise amplifier ideally suited for microwave radios and C and X-band applications where high gain, low noise figure and low power consumption are needed. The broadband device delivers 27 dB of gain with a corresponding output 1 dB compression point of +13 dBm and a noise figure of 1.4dB. The CMD229 is a 50 ohm matched desig.
► Low noise figure
► High gain broadband performance
► Low current consumption
► All positive bias
► Small die size
Description
The CMD229 is a broadband MMIC low noise amplifier ideally suited for microwave radios and C and X-band applications where high gain, low noise figure and low power consumption are needed. The broadband device delivers 27 dB of gain with a corresponding output 1 dB compression point of +13 dBm and a noise figure of 1.4dB. The CMD229 is a 50 ohm matched design eliminating the need for external DC blocks and RF port matching. The CMD229 offers full passivation for incre.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CMD226 |
Custom MMIC |
Passive Frequency Doubler | |
2 | CMD2264 |
CMD |
Novel Low Cost Green-Power PWM Controller | |
3 | CMD226C3 |
Qorvo |
Frequency Doubler | |
4 | CMD226C3 |
Custom MMIC |
Frequency Doubler | |
5 | CMD227C3 |
Custom MMIC |
Frequency Doubler | |
6 | CMD201P5 |
Custom MMIC |
DC-20 GHz Distributed Power Amplifier | |
7 | CMD20N06L |
Cmos |
60V N-Channel MOSFET | |
8 | CMD213 |
Custom MMIC |
30-40 GHz Active Frequency Doubler | |
9 | CMD214 |
Custom MMIC |
24-36 GHz Active Frequency Doubler | |
10 | CMD215 |
Custom MMIC |
DC-40 GHz SPDT Reflective Switch | |
11 | CMD216 |
Custom MMIC |
14-18 GHz GaN Power Amplifier | |
12 | CMD218 |
Custom MMIC |
5-9 GHz GaN Low Noise Amplifier |