CLD370F - Clairex

CLD370F Plastic PIN Photodiode

The CLD370F is a high gain silicon photodiode mounted in a T-1¾ (5mm) dark plastic package. The chip has an active area of approximately 0.080" x 0.080" (4 square mm) and is intended for use as an infrared sensor. The dark tinting of the package effectively attenuates wavelengths shorter than 700nm eliminating most visible light interference. electrical cha.

Features

•
•
•
•
•
• fast switching speed low junction capacitance 850 nm peak response large photosensitive area sharp cutoff to visible wavelengths ± 30° acceptance angle absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature……………………………………………………-40°C to +125°C operating temperature………………………………………………… -40°C to +100°C lead soldering temperature(1)………………………………………………………260°C continuous power dissipation(2) …………………………………………………150mW notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 1.6mW/°C from 25°C free air temperature to TA = +100°C. 3. Protrudin.