The Comlinear CLC2000 and CLC4000 are dual and quad voltage feedback amplifiers that offer ±200mA of output current at 9.4Vpp. The CLC2000 and CLC4000 are capable of driving signals to within 1V of the power rails. When connected as a differential line driver, the amplifier drives signals up to 18.8Vpp into a 25Ω load, which supports the peak upstream power .
n 9.4Vpp output drive into RL= 25Ω n Using both amplifiers, 18.8Vpp differential output drive into RL= 25Ω n ±200mA @ Vo = 9.4Vpp n 0.009%/0.06˚ differential gain/ phase error n 250MHz -3dB bandwidth at G = 2 n 510MHz -3dB bandwidth at G = 1 n 210V/μs slew rate n 4.5nV/√Hz input voltage noise n 2.7pA/√Hz input current noise n 7mA supply current n Fully specified at 5V and 12V supplies General Description The Comlinear CLC2000 and CLC4000 are dual and quad voltage feedback amplifiers that offer ±200mA of output current at 9.4Vpp. The CLC2000 and CLC4000 are capable of driving si.
The Comlinear CLC2000 is a dual voltage feedback amplifier that offers ±200mA of output current at 9.4Vpp. The CLC2000 i.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CLC200 |
National Semiconductor |
Fast Settling/ Wideband Operational Amplifiers | |
2 | CLC2005 |
Exar |
Rail-to-Rail Amplifiers | |
3 | CLC2005 |
Cadeka |
260MHz Rail-to-Rail Amplifier | |
4 | CLC2007 |
Exar |
High Speed RRO Amplifiers | |
5 | CLC2008 |
Exar |
75MHz Rail-to-Rail Amplifiers | |
6 | CLC2009 |
Exar |
35MHz Rail-to-Rail Amplifiers | |
7 | CLC2010 |
Exar |
7.3MHz Rail-to-Rail Amplifiers | |
8 | CLC2011 |
Exar |
Rail-to-Rail I/O Amplifiers | |
9 | CLC2011 |
Cadeka |
(CLCx011) Rail-to-Rail I/O Amplifiers | |
10 | CLC2023 |
Exar |
RRIO Amplifier | |
11 | CLC203 |
Comlinear Corporation |
Fast Setting High Current Wideband Op Amps | |
12 | CLC203AI |
ETC |
The Hybrid OP AMP |