ordering information The ’HCT573 devices are octal transparent D-type latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs. CD54HCT573 . . . F PACKAGE CD74HCT573 . . . DB, E, OR M PACKAGE (TOP VIEW) OE 1 1D 2 2D 3 3D 4 4D 5 5D 6 6D 7 7D 8 8.
high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERI.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CD74HCT573E |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES | |
2 | CD74HCT574 |
Texas Instruments |
Octal D-Type Flip-Flop | |
3 | CD74HCT574-EP |
Texas Instruments |
HIGH-SPEED CMOS LOGIC OCTAL D-TYPE FLIP-FLOP | |
4 | CD74HCT574-Q1 |
Texas Instruments |
HIGH-SPEED CMOS LOGIC OCTAL D-TYPE FLIP-FLOP | |
5 | CD74HCT574E |
Texas Instruments |
Octal D-Type Flip-Flop | |
6 | CD74HCT574M |
Texas Instruments |
Octal D-Type Flip-Flop | |
7 | CD74HCT574M96 |
Texas Instruments |
Octal D-Type Flip-Flop | |
8 | CD74HCT574PWR |
Texas Instruments |
Octal D-Type Flip-Flop | |
9 | CD74HCT533 |
Texas Instruments |
Octal Inverting Transparent Latch | |
10 | CD74HCT533E |
Texas Instruments |
Octal Inverting Transparent Latch | |
11 | CD74HCT534 |
Texas Instruments |
Octal D-Type Flip-Flop | |
12 | CD74HCT534E |
Texas Instruments |
Octal D-Type Flip-Flop |