A High on either enable input forces the output into the High state. The demultiplexing function is performed by using the four input lines, A0 to A3, to select the output lines Y0 to Y15, and using one enable as the data input while holding the other enable low. Ordering Information PART NUMBER CD54HC154F3A CD54HCT154F3A CD74HC154E CD74HC154EN CD74HC154M.
• Two Enable Inputs to Facilitate Demultiplexing and Cascading Functions
• Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
• Wide Operating Temperature Range . . . -55oC to 125oC
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL Logic ICs
• HC Types - 2V to 6V Operation - High Noise Immunity: NIL = 30%, NIH = 30%of VCC at VCC = 5V
• HCT Types - 4.5V to 5.5V Operation - Direct LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH = 2V (Min).
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CD74HC154 |
Texas Instruments |
4- to 16-Line Decoder/Demultiplexer | |
2 | CD74HC154M |
Texas Instruments |
4- to 16-Line Decoder/Demultiplexer | |
3 | CD74HC151 |
Texas Instruments |
8-Input Multiplexer | |
4 | CD74HC153 |
Texas Instruments |
Dual 4- to 1-Line Selector/Multiplexer | |
5 | CD74HC157 |
Texas Instruments |
Quad 2-Input Multiplexers | |
6 | CD74HC158 |
Texas Instruments |
Quad 2-Input Multiplexers | |
7 | CD74HC10 |
Texas Instruments |
Triple 3-Input NAND Gates | |
8 | CD74HC107 |
Texas Instruments |
Dual J-K Flip-Flop | |
9 | CD74HC109 |
Texas Instruments |
Dual J-K Flip-Flop | |
10 | CD74HC10E |
Texas Instruments |
Triple 3-Input NAND Gates | |
11 | CD74HC10M |
Texas Instruments |
Triple 3-Input NAND Gates | |
12 | CD74HC11 |
Texas Instruments |
Triple 3-Input AND Gate |