The ’AC164 and ’ACT164 are 8-bit serial-in/parallel-out shift registers with asynchronous reset that utilize Advanced CMOS Logic technology. Data is shifted on the positive edge of the clock (CP). A LOW on the Master Reset (MR) pin resets the shift register and all outputs go to the LOW state regardless of the input conditions. Two Serial Data inputs (DS1 an.
• Buffered Inputs
• Typical Propagation Delay - 6ns at VCC = 5V, TA = 25oC, CL = 50pF
• Exceeds 2kV ESD Protection MIL-STD-883, Method 3015
• SCR-Latchup-Resistant CMOS Process and Circuit Design
• Speed of Bipolar FAST™/AS/S with Significantly Reduced Power Consumption
• Balanced Propagation Delays
• AC Types Feature 1.5V to 5.5V Operation and Balanced Noise Immunity at 30% of the Supply
• ±24mA Output Drive Current - Fanout to 15 FAST™ ICs - Drives 50Ω Transmission Lines
Description
The ’AC164 and ’ACT164 are 8-bit serial-in/parallel-out shift registers with asynchronous reset that utilize A.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CD74ACT161 |
Texas Instruments |
4-BIT SYNCHRONOUS BINARY COUNTERS | |
2 | CD74ACT163 |
Texas Instruments |
4-BIT SYNCHRONOUS BINARY COUNTERS | |
3 | CD74ACT10 |
Texas Instruments |
TRIPLE 3-INPUT POSITIVE-NAND GATES | |
4 | CD74ACT109 |
Texas Instruments |
DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS | |
5 | CD74ACT112 |
Texas Instruments |
DUAL J-K NEGATIVE-EDGE-TRIGGERED FLIP-FLOPS | |
6 | CD74ACT138 |
Texas Instruments |
3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS | |
7 | CD74ACT139 |
Texas Instruments |
DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS | |
8 | CD74ACT14 |
Texas Instruments |
Hex Schmitt-Trigger Inverter | |
9 | CD74ACT151 |
Texas Instruments |
8-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS | |
10 | CD74ACT153 |
Texas Instruments |
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS | |
11 | CD74ACT157 |
Texas Instruments |
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER | |
12 | CD74ACT158 |
Texas Instruments |
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER |