CCD201-20 - E2V

CCD201-20 Electron Multiplying CCD Sensor

CCD201-20 Back Illuminated 2-Phase IMO Series Electron Multiplying CCD Sensor INTRODUCTION The CCD201 is a large format sensor (41k ) in the L3Vision range of products from e2v technologies. This device uses a novel output amplifier circuit that is capable of operating at an equivalent output noise of less than one electron at pixel rates of over 15 MHz. Th.

Features

the charge is multiplied in the gain register before conversion to a voltage by an output amplifier. The sensor has two output amplifiers; a low noise, high responsivity output for normal CCD operation and a large signal amplifier for when multiplication gain is employed. Operation of the high gain mode is controlled by adjustment of the multiplication phase amplitude R12HV. 2 TM GENERAL DATA Active image area . . . . . . Image section active pixels . . . Image pixel size . . . . . . . Number of output amplifiers . . Fill factor . . . . . . . . . Additional dark reference columns Additional o.