The bq77910A is a battery protection and cell balancing device intended for Li-Ion and Li-Polymer battery packs. The bq77910A monitors 4- to 10-series individual cell voltages and provides fast-acting outputs that may be used to drive N-channel MOSFETs to interrupt the power path. Activation delays and recovery methods for safety conditions are fully program.
• 4-, 5-, 6-, 7-, 8-, 9-, or 10-Series Cell Protection
• Individual Cell-Voltage Monitoring
• Low-Side NMOS FET Drive for Charge and
Discharge Control
• Compatible With 1-mΩ Current-Sense Resistor
• Supply-Voltage Range From 5.6 V to 50 V
• Integrated 3.3-V Micro-Power LDO Regulator
• Low Supply Current
– Normal Mode: 50 µA, Typical
– Shutdown Mode, LDO OFF: 3 µA, Typical
1
• 38-Pin TSSOP Package
• Internal 50-mA Automatic Cell Balancing
2 Applications
• Cordless Power Tools
• Cordless Lawn Equipment
• Electric Bikes
• UPS
• Light Electric Vehicles (LEV)
3 Description
The bq77910A is a batte.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BQ77915 |
Texas Instruments |
3-Series to 5-Series Stackable Ultra-Low Power Primary Protector | |
2 | BQ77904 |
Texas Instruments |
Stackable Lithium-Ion Battery Protector | |
3 | BQ77905 |
Texas Instruments |
Stackable Lithium-Ion Battery Protector | |
4 | BQ77908A |
Texas Instruments |
Multi-Cell Lithium-Ion/Polymer Precision Protector | |
5 | bq771600 |
Texas Instruments |
Overvoltage Protection | |
6 | bq771601 |
Texas Instruments |
Overvoltage Protection | |
7 | bq771602 |
Texas Instruments |
Overvoltage Protection | |
8 | bq771604 |
Texas Instruments |
Overvoltage Protection | |
9 | bq771605 |
Texas Instruments |
Overvoltage Protection | |
10 | bq771611 |
Texas Instruments |
Overvoltage Protection | |
11 | bq771612 |
Texas Instruments |
Overvoltage Protection | |
12 | BQ7718 |
Texas Instruments |
Overvoltage Protection |