BM92A13 is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using base-band communication. It is compatible with USB Type-C Specification and USB Power Delivery specification. BM92A13 includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP,.
USB Type-C Specification compatible
USB PD Specification compatible (BMC-PHY)
Connected the required initial voltage is 15V
Request current depends on the far-end device
Start of automatic power receiving without Ext-MCU
Two channel power path control using N-channel MOSFET drivers with back flow prevention
Type-C cable orientation detection
Built-in VCONN Switch and VCONN controller
Direct VBUS powered operation
Initial Role is UFP mode (Supports DFP/DRP mode)
Supports Dead Battery operation
SMBus Interface for Host Communication
Applications
Consumer Applications L.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BM92A11MWV-Z |
ROHM |
USB Type-C Power Delivery Controller | |
2 | BM92A12MWV-Z |
ROHM |
USB Type-C Power Delivery Controller | |
3 | BM92A20MWV |
ROHM |
USB Type-C Power Delivery Controller | |
4 | BM92A30MWV |
ROHM |
USB Type-C Power Delivery Controller | |
5 | BM92A30MWV-Z |
ROHM |
USB Type-C Power Delivery Controller | |
6 | BM92A50MWV |
ROHM |
USB Type-C Power Delivery Controller | |
7 | BM92A56MWV-Z |
ROHM |
USB Type-C Power Delivery Controller | |
8 | BM9209 |
BOOKLY |
300mA CMOS LDO | |
9 | BM9230 |
Bookly |
600mA CMOS LDO | |
10 | BM92T10MWV |
ROHM |
USB Type-C Power Delivery Controller | |
11 | BM92T20MWV |
ROHM |
USB Type-C Power Delivery Controller | |
12 | BM92T30MWV |
ROHM |
USB Type-C Power Delivery Controller |