The PWM type DC/DC converter (BM2Pxx4 Series) for AC/DC provide an optimum system for all products that include an electrical outlet. This IC supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters. This IC built in a HV starter circuit that tolerates 650V, it contributes to low-pow.
PWM frequency : 65kHz
PWM current mode method
Burst operation when load is light
Frequency reduction function
Built-in 650V start circuit
Built-in 650V switching MOSFET
VCC pin under voltage protection
VCC pin overvoltage protection
SOURCE pin Open protection
SOURCE pin Short protection
SOURCE pin Leading-Edge-Blanking function
Per-cycle over current protection circuit
Soft start
Secondary Over current protection circuit
Package DIP7K
DIP7F
W(Typ.) x D(Typ.) x H(Max.) 9.27mm x 6.35mm x 8.63mm Pitch 2.54mm(Typ.) 9.20mm x 6.35mm x 7.60mm Pitch 2.54mm(Typ.)
Applicat.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BM2P091 |
ROHM |
DC/DC Converter | |
2 | BM2P091F |
ROHM |
DC/DC Converter | |
3 | BM2P092 |
ROHM |
DC/DC Converter | |
4 | BM2P092F |
ROHM |
DC/DC Converter | |
5 | BM2P093 |
ROHM |
DC/DC Converter | |
6 | BM2P093F |
ROHM |
DC/DC Converter | |
7 | BM2P094F |
ROHM |
DC/DC Converter | |
8 | BM2P011 |
ROHM |
DC/DC Converter | |
9 | BM2P012 |
ROHM |
DC/DC Converter | |
10 | BM2P013 |
ROHM |
DC/DC Converter | |
11 | BM2P014 |
Rohm |
DC/DC converter | |
12 | BM2P015-Z |
ROHM |
DC/DC Converter |