The BL2940 positive voltage regulator features the ability to source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been SOT223 included which reduces the ground current when the differential between the input voltage and the out.
the ability to source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been SOT223 included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output TO-252 current and an input-output differential of 5V is therefore only 30 mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VIN − VOUT ≤ 3V). Designed also for vehicular T.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BL2950 |
BELLING |
100 mA Low-Dropout Voltage Regulator | |
2 | BL2951 |
BELLING |
100 mA Low-Dropout Voltage Regulator | |
3 | BL2000 |
UIT |
UIT BL2000 Hardware installation and maintenance guide | |
4 | BL2000 |
Z-World |
Single Board Computer | |
5 | BL2002A |
Bolymin |
Display | |
6 | BL2002A1 |
Bolymin |
DISPLAY | |
7 | BL2002AW |
Bolymin |
DISPLAY | |
8 | BL2002B |
Bolymin |
Display | |
9 | BL2004A |
Bolymin |
PLED | |
10 | BL2004A1 |
Bolymin |
DISPLAY | |
11 | BL2004AW |
Bolymin |
DISPLAY | |
12 | BL2012-10B2450 |
Advanced Ceramic X |
Multilayer Chip Baluns |