BD60203EFV is 2ch H-bridge motor driver for DC brush motor. This driver can facilitate low power consumption by PWM constant current control. Various protection circuits are built in. And also a circuit for lock detection is built in, so it is possible to output an error detection signal corresponding to Wired-Or signaling motor lock status. It contributes t.
Single Power Supply Input (rated voltage of 36 V)
Rated Output Current (peak): 1.7 A(3.0 A)
Low ON-Resistance DMOS Output
PH, EN Input
Power Save Function
PWM Constant Current Control (current limit function)
Built-in Spike Noise Cancel Function (external noise filter is unnecessary)
Driver for 2 DC Brush Motor
Built-in Logic Input Pull-down Resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lockout Circuit (UVLO)
Over Voltage Lockout Circuit (OVLO)
Built-in Comparator for Lock Detection .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BD6020GU |
Rohm |
Power supply | |
2 | BD6023AGU |
Rohm |
Power supply | |
3 | BD6025GU |
Rohm |
Power supply | |
4 | BD6026GU |
Rohm |
Power supply | |
5 | BD6028GU |
Rohm |
Power supply | |
6 | BD601 |
ETC |
(BD6xx) Silicon Power Transistor | |
7 | BD6030GSW |
Rohm |
Negative power supply | |
8 | BD6039GU |
Rohm |
Power Supply | |
9 | BD605 |
ETC |
(BD6xx) Silicon Power Transistor | |
10 | BD606 |
ETC |
(BD6xx) Silicon Power Transistor | |
11 | BD6061GUT |
Rohm |
Synchronous rectification step-up DC/DC converter | |
12 | BD6062GU |
Rohm |
Flash LED Driver |