BD35390FJ is a termination regulator that complies with JEDEC requirements for DDR1/2/3-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability up to 1A and has a power supply bias requirement of 3.3V to 5.0V for driving the N-c.
■ Incorporates a Push-Pull Power Supply for Termination (VTT)
■ Incorporates an Enabler
■ Incorporates an Under Voltage Lockout (UVLO)
■ Incorporates a Thermal Shutdown Protector (TSD)
■ Compatible with Dual Channel (DDR1, DDR2,
DDR3)
■ Incorporates PGOOD Function
SOP-J8 4.90mm x 6.00mm x 1.65mm
Applications
Power Supply for DDR 1/2/3 - SDRAM
Typical Application Circuit, Block Diagram
VCC
C3
VDDQ
VCC
6
VDDQ
5
Reference Block
VCC UVLO
SOFT TSD EN UVLO
Enable EN
4
Thermal TSD Protection
EN
2
GND
VTT_IN
C5
VTT_IN
7
VCC
TSD EN VCC UVLO TSD EN UVLO
Delay Logic
VTT
8
C7
3
VTTS
1
.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BD35395FJ-M |
Rohm |
Termination Regulator | |
2 | BD3539FVM |
ROHM |
Termination Regulator | |
3 | BD3539NUX |
ROHM |
Termination Regulator | |
4 | BD3530F |
Rohm |
DDR-SDRAM Termination Regulator | |
5 | BD3531F |
Rohm |
Termination Regulator | |
6 | BD3532F |
Rohm |
Termination Regulator | |
7 | BD3533F |
Rohm |
Termination Regulators | |
8 | BD3533FVM |
Rohm |
Termination Regulators | |
9 | BD3533HFN |
Rohm |
Termination Regulators | |
10 | BD3536 |
Won-Top Electronics |
35A AVALANCHE BOSCH TYPE PRESS-FIT DIODE | |
11 | BD3537F |
Rohm |
Termination Regulators | |
12 | BD3538F |
Rohm |
Termination Regulators |