BD1HC/D500 Series is an Automotive 1ch High-Side switch. It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection. Application ■ For automotive (Air conditioner, body equipment, and meter, etc.) .
■ Built-in overcurrent protection circuit
■ Built-in Thermal Shut Down(TSD)
■ Built-in Open Load Detection circuit(When Output is OFF)
■ Possibility to control directly from CMOS logic IC
■ Low standby current
■ Built-in Under Voltage Lock Out circuit
■ Built-in diagnostic(ST) output function
■ Low On resistance of RDS(ON)=500mΩ(Typ) (VDD=12V, Ta=25°C, Io=0.25A)
■ Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip
■ 1ch High-side switch for the mechanical relay coil drive
■ AEC-Q100 qualified (1)
(1) Grade 1
General Description BD1HC/D500 Series is an Auto.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BD1HC500EFJ-C |
Rohm |
1ch High-side switch | |
2 | BD1HC500FVM-C |
Rohm |
1ch High-side switch | |
3 | BD1HD500EFJ-C |
Rohm |
1ch High-side switch | |
4 | BD1HD500FVM-C |
Rohm |
1ch High-side switch | |
5 | BD1HD500HFN-C |
Rohm |
1ch High-side switch | |
6 | BD101 |
Sinyork |
RECTIFIER DIODE | |
7 | BD101W |
Sinyork |
RECTIFIER DIODE | |
8 | BD101WS |
Sinyork |
RECTIFIER DIODE | |
9 | BD1020HFV |
Rohm |
Temperature Sensor | |
10 | BD1040S |
Pan Jit International |
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS | |
11 | BD107 |
Inchange Semiconductor |
Silicon NPN Power Transistor | |
12 | BD10H150CS |
Pan Jit International |
ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS |