of product and working principle .. 2-3 3 Safety instructions ............ 4-5 4 Transport and storage ......... 5 5 Installation / Connection ... 5-7 6 Start up / Shut down ............ 7 7 Operation...........
(e.g. with mechanical seal) BFS 250 S 80 -G 2.5 Pump Models BFS, TFS immersion style FFS foot mounted inline style BAS6960 Edition 03/2014 Page 2 of 12 2.6 Limit of Application Type BFS, TFS, FFS Mediums Oils, cooling / cutting oils coolants Max. delivery pressure 2175 PSI (150 bar) (2900 PSI (200 bar ) for BFS/FFS1, BFS/FFS2 and TFS/BFS/FFS3 upon request) Minimum discharge pressure Ensure that the discharge pressure is at least 29 PSI (2 bar) higher than the inlet pressure Minimum inlet pressure Kinetic viscosity of the medium 12 PSI (0.8 bar) absolute, (Pumps with a flow ra.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BAS69 |
STMicroelectronics |
Low capacitance small signal Schottky diodes | |
2 | BAS678 |
NXP |
High-speed diode | |
3 | BAS100ATB6 |
Pan Jit International |
SURFACE MOUNT DUAL ISOLATED OPPOSING SILICON SCHOTTKY DIODES | |
4 | BAS101 |
NXP |
High Voltage Switching Diodes | |
5 | BAS101S |
NXP |
High Voltage Switching Diodes | |
6 | BAS11 |
NXP |
Controlled avalanche rectifiers | |
7 | BAS116 |
nexperia |
Low-leakage diode | |
8 | BAS116 |
Diodes Incorporated |
SURFACE MOUNT LOW LEAKAGE DIODE | |
9 | BAS116 |
Infineon |
Silicon Low Leakage Diode | |
10 | BAS116 |
Kexin |
Low-leakage diode | |
11 | BAS116 |
LITE-ON |
SURFACE MOUNT FAST SWITCHING DIODE | |
12 | BAS116 |
WON-TOP |
SURFACE MOUNT FAST SWITCHING DIODE |