Multimedia ICs 2-input, 1-output video signal switcher BA7654F The BA7654F is video signal switch consisting of two input pins (IN1 and IN2), one CTL pin (CTL), and one output pin (OUT). The inputs are sync-tip clamped (synchronous edge of the video input signals are aligned to the same voltage), and as the input impedance is extremely large, it is possible.
• 1) Small clamp capacitors can be used (ceramic, 3000pF (Min.), 0.01µF (FZ) (recommended)). 2) Low supply voltage operation possible supply voltage range is 3.7V to 7.7V. 3) Superimposition used for fast switching speed with low switching noise (70ns Typ.). 4) Low power consumption (when VCC = 5V, 25mW Typ.). 5) Wide dynamic range (when VCC = 5V, 3.1VP-P Typ.). 6) Excellent frequency characteristics (10MHz, 0dB Typ.). 7) Low interchannel crosstalk (
– 70dB Typ.). 8) Voltage can be applied to the control pins even when VCC is not applied.
•Selected output mode setting table
CTL L H OUT IN1 IN2.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BA7652AF |
Rohm |
Video signal swither/ 1 x 3-channel with clamped-input | |
2 | BA7653AF |
Rohm |
Video signal switcher/ 1 x 3-channel with clamped-input | |
3 | BA7655A |
Rohm |
Dual Voltage-controlled Amplifier | |
4 | BA7655AF |
Rohm |
Dual Voltage-controlled Amplifier | |
5 | BA7657F |
Rohm |
Ultra Wide Band Triple Circuits Video Signal Switchers | |
6 | BA7657S |
Rohm |
Input selector switch for high definition displays | |
7 | BA7658AFS |
Rohm |
Input selector switch for high definition displays | |
8 | BA7602 |
Rohm |
Video signal switcher | |
9 | BA7602F |
Rohm |
Video signal switcher | |
10 | BA7603 |
Rohm |
Video signal switcher | |
11 | BA7603F |
Rohm |
Video signal switcher | |
12 | BA7604N |
Rohm |
Video signal switcher |