Primary lithium battery system BA 5390/U 12 V Primary lithium manganese dioxide (Li-MnO2) battery ■ ■ ■ ■ ■ ■ ■■ ■ ■ ■ ■ ■ ■ ■ ■ The battery consists of 10 LM 33550 cells connected in 2 groups of 5 cells in series providing 2 nominal 12 V sections at connector. These sections can be connectedin series (for 24 V) in parallel (for 12 V), or used as two separ.
■ A non-replaceable fuse is incorporated in the negative leg of each series group of cells
■ A normally closed high temperature switch or thermal fuse is incorporated into each series leg of cells
■ Internal series string short circuit protection incorporated into each leg of the battery
■ A diode is incorporated into the positive leg of each series group of cells to prevent charging or flow of current into the battery
■ A device consisting of a manually activated switch and resistors designed to discharge the battery to 0 V is built into the battery (optional)
■ Optional design with push butt.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BA5302 |
ETC |
Power Amplifier | |
2 | BA531 |
Iskra Semic |
(BA5xx) Diodes | |
3 | BA532 |
Rohm |
Power Amplifier | |
4 | BA533 |
Iskra Semic |
(BA5xx) Diodes | |
5 | BA534 |
Rohm |
9V/2.3W single-channel power amplifier | |
6 | BA536 |
Rohm |
Dual Power Amplifier | |
7 | BA5360 |
SAFT |
9V Primary lithium manganese dioxide (Li-MnO2) battery | |
8 | BA5368 |
SAFT |
12V Primary lithium manganese dioxide (Li-MnO2) battery | |
9 | BA5372 |
SAFT |
6V Primary lithium manganese dioxide (Li-MnO2) battery | |
10 | BA5380 |
SAFT |
6V Primary lithium manganese dioxide (Li-MnO2) battery | |
11 | BA505 |
XPiQ |
DC / DC Converters | |
12 | BA5096 |
ETC |
BA5096 |