ATtiny4313 - Atmel

ATtiny4313 8-bit Microcontroller

1.1.1 VCC Digital supply voltage. 1.1.2 GND Ground. 1.1.3 Port A (PA2..PA0) Port A is a 3-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port A output buffers have symmetrical drive characteristics with both high sink and source capability, except PA2 which has the RESET capability. To use pin PA2 as I/O pin, .

Features

• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
  – 120 Powerful Instructions
  – Most Single Clock Cycle Execution
  – 32 x 8 General Purpose Working Registers
  – Fully Static Operation
  – Up to 20 MIPS Throughput at 20 MHz
• Data and Non-volatile Program and Data Memories
  – 2/4K Bytes of In-System Self Programmable Flash
• Endurance 10,000 Write/Erase Cycles
  – 128/256 Bytes In-System Programmable EEPROM
• Endurance: 100,000 Write/Erase Cycles
  – 128/256 Bytes Internal SRAM
  – Programming Lock for Flash Program and EEPROM Data Security
• Peripheral Features
  – One 8.