.......9 2. Configuration Summary. 10 3. Ordering Information ..... 11 4. B.
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Two 16-bit Timer/Counters with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Eight PWM Channels
– 8-channel 10-bit ADC
• Differential Mode with Selectable Gain at 1×, 10× or 200×
– One Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
– Two Programmable Serial USART
– One Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Fea.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ATMEGA128 |
ATMEL Corporation |
8-bit Atmel Microcontroller | |
2 | ATMEGA1280 |
ATMEL Corporation |
8-BIT Microcontroller | |
3 | ATmega1280 |
Microchip |
8-bit Microcontroller | |
4 | ATMEGA1280V |
ATMEL |
8-bit Microcontroller | |
5 | ATmega1280V |
Microchip |
8-bit Microcontroller | |
6 | ATMEGA1281 |
ATMEL Corporation |
8-BIT Microcontroller | |
7 | ATmega1281 |
Microchip |
8-bit Microcontroller | |
8 | ATMEGA1281V |
ATMEL |
8-bit Microcontroller | |
9 | ATmega1281V |
Microchip |
8-bit Microcontroller | |
10 | ATmega1284P |
Microchip |
CMOS 8-bit microcontrollers | |
11 | ATmega1284P |
ATMEL |
8-bit Microcontroller | |
12 | ATmega1284RFR2 |
ATMEL |
8-bit Microcontroller |