The ATL43xLI-Q1 is a three-terminal adjustable shunt regulator, with specified thermal stability over applicable automotive, commercial, and military temperature ranges. Its output voltage can be set to any value between Vref (approximately 2.5 V) and 36 V with two external resistors. The device has a typical output impedance of 0.3 Ω. Its active output circ.
•1 Qualified for automotive applications
• AEC-Q100 qualified with the following results:
– Device temperature grade 1:
–40°C to +125°C ambient operating temperature
• Reference voltage tolerance at 25°C
– 0.5% (B grade)
– 1% (A grade)
• Minimum typical output voltage: 2.5 V
• Adjustable output voltage: Vref to 36 V
• Operation from −40°C to +125°C
• 27 mV maximum temperature drift
• 0.3-Ω typical output impedance
• Sink-current capability
– Imin = 0.08 mA (max)
– IKA = 15 mA (max)
• Reference input current IREF: 0.4 μA (max)
• Deviation of reference input current over temperature, II(dev): 0..
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ATL431LI |
Texas Instruments |
High Bandwidth Low-Iq Programmable Shunt Regulator | |
2 | ATL431 |
Texas Instruments |
2.5-V Low Iq Adjustable Precision Shunt Regulator | |
3 | ATL432 |
Texas Instruments |
2.5-V Low Iq Adjustable Precision Shunt Regulator | |
4 | ATL432LI |
Texas Instruments |
High Bandwidth Low-Iq Programmable Shunt Regulator | |
5 | ATL432LI-Q1 |
Texas Instruments |
Programmable Shunt Regulator | |
6 | ATL10-3 |
Brown Boveri |
Triode | |
7 | ATL120 |
Global Light |
LED | |
8 | ATL25 |
ATMEL Corporation |
ASIC | |
9 | ATL5-1 |
Brown Boveri |
Triode | |
10 | ATLD201V1 |
AT |
Dual Mode 30MHz Modulation Laser Controller | |
11 | ATLM143 |
Anloy Technologies |
High Voltage Operational Amplifier | |
12 | ATLM343 |
Anloy Technologies |
High Voltage Operational Amplifier |