The ATA6026 is used to drive a continuous-current motor in a full H-bridge configuration. An external microcontroller controls the driving function of the ATA6026 by www.DataSheet4U.com providing a PWM signal and a direction signal, and allows the usage of the ATA6026 in a windshield wiper application, for example. The ATA6026 supports PWM and direction-cont.
• PWM and Direction-controlled Driving of Four Externally Powered NMOS Transistors
• Internal Charge Pump Provides Gate Voltages for High-side Drivers in Permanent ON
Mode and Supplies the Gate of the External Battery Reverse Protection NMOS
• 5V Regulator With External Power Device (NPN) and Current Limitation Function
• Reset Derived From 5V Regulator Output Voltage
• Sleep Mode With Supply Current of Typical 35 µA, Wake-up by Signal on Pin EN or on
•
•
•
•
•
•
SCI Interface (Pin /DATA) Window Watchdog; the Watchdog Time is Programmable by Choosing a Certain Value of the External Watchdog C.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ATA6020N |
ATMEL Corporation |
Low-current Microcontroller | |
2 | ATA6025 |
ATMEL Corporation |
WATCHDOG IC | |
3 | ATA6140 |
ATMEL Corporation |
TWO RELAY FLASHER | |
4 | ATA6264 |
ATMEL Corporation |
Airbag Power Supply IC | |
5 | ATA6285 |
ATMEL Corporation |
TPMS Control and Transmitter IC | |
6 | ATA6286 |
ATMEL Corporation |
(ATA6285 / ATA6286) TPMS Control and Transmitter IC | |
7 | ATA6405 |
ATMEL Corporation |
12/24V SYSTEM POWER SUPPLY IC | |
8 | ATA644S28 |
PST |
Asymmetric thyristors | |
9 | ATA6560 |
Microchip |
High-Speed CAN Transceiver | |
10 | ATA6561 |
Microchip |
High-Speed CAN Transceiver | |
11 | ATA6562 |
Microchip |
High-Speed CAN Transceiver | |
12 | ATA6563 |
Microchip |
High-Speed CAN Transceiver |