MNEMONIC GND AGND VCC AVCC AREF CLKO RESET# OCD XTAL1 XTAL2 NAME, FUNCTION & ALTERNATE FUNCTION Ground: 0V reference Analog Ground: 0V reference for analog part Power Supply Analog Power Supply: This is the power supply voltage for analog part For a normal use this pin must be connected. Analog Reference: Reference for analog converter. This is the refere.
• High performance, low power Atmel®AVR® 8-bit Microcontroller
• Advanced RISC architecture
– 131 powerful instructions - most single clock cycle execution
– 32 × 8 general purpose working registers
– Fully static operation
– Up to 1 MIPS throughput per MHz
– On-chip 2-cycle multiplier
• Data and non-volatile program memory
– 8/16Kbytes of in-system programmable program memory flash
• Endurance: 10,000 write/erase cycles
• Lock bits protection
• Optional 2/4Kbytes boot code section with independent lock bits
• In-system programming by on-chip boot program
• True read-while-write operation
– 51.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AT90PWM1 |
ATMEL Corporation |
8-bit Microcontroller | |
2 | AT90PWM161 |
ATMEL |
8-bit Microcontroller | |
3 | AT90PWM2 |
ATMEL Corporation |
8-bit Microcontroller | |
4 | AT90PWM216 |
ATMEL Corporation |
8-bit Microcontroller | |
5 | AT90PWM2B |
ATMEL Corporation |
8-bit Microcontroller | |
6 | AT90PWM3 |
ATMEL Corporation |
8-bit Microcontroller | |
7 | AT90PWM316 |
ATMEL Corporation |
8-bit Microcontroller | |
8 | AT90PWM3B |
ATMEL Corporation |
8-bit Atmel Microcontroller | |
9 | AT90-0001 |
Tyco Electronics |
Digital Attenuator/ 31.0 dB/ 5-Bit/ TTL Driver/ DC-6.0 GHz | |
10 | AT90-0106 |
Tyco Electronics |
Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC-2.4 GHz | |
11 | AT90-0107 |
Tyco Electronics |
Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC-4.0 GHz | |
12 | AT90-0233 |
Tyco Electronics |
Digital Attenuator/ 30 dB/ 4-Bit/ TTL Driver/ DC - 2.5 GHz |