The AS1150 and AS1151 are quad flow-through LVDS (low-voltage differential signaling) receivers which accept LVDS differential inputs and convert them to LVCMOS outputs. The receivers are perfect for lowpower low-noise applications requiring high signaling rates and reduced EMI emissions. The devices are guaranteed to receive data at speeds up to 500Mbps (25.
integrated parallel termination resistors (nominally 107Ω), which eliminate the requirement for discrete termination resistors, and reduce stub lengths. The integrated failsafe feature sets the output high if the inputs are open, undriven and terminated, or undriven and shorted. Enable inputs (EN and ENn
– internally pulled down to GND) control the high-impedance output and are common to all four receivers. All inputs conform to the ANSI TIA/EIA- 644 LVDS standards. Flow-through pinout simplifies PC board layout and reduces crosstalk by separating the LVDS inputs and LVCMOS outputs. The device.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AS115-61 |
ETC |
GaAs IC SP4T Non-Reflective Switch | |
2 | AS1151 |
austriamicrosystems AG |
Quad LVDS Receivers | |
3 | AS1152 |
austriamicrosystems AG |
Quad LVDS Driver | |
4 | AS1153 |
austriamicrosystems AG |
Single/Dual LVDS Receivers | |
5 | AS1154 |
austriamicrosystems AG |
Single/Dual LVDS Driver | |
6 | AS1155 |
austriamicrosystems AG |
Single/Dual LVDS Receivers | |
7 | AS1156 |
austriamicrosystems AG |
Single/Dual LVDS Driver | |
8 | AS1157 |
austriamicrosystems AG |
Single/Dual LVDS Receivers | |
9 | AS1158 |
austriamicrosystems AG |
Single/Dual LVDS Receivers | |
10 | AS1100 |
AMSCO |
Serially Interfaced 8-Digit LED Driver | |
11 | AS1101 |
AMSCO |
(AS1101 - AS1104) Low-Dropout LED Drivers | |
12 | AS1102 |
AMSCO |
(AS1101 - AS1104) Low-Dropout LED Drivers |