The APA4880 is an integrated class AB stereo headphone amplifier contained in SOP-8, TSSOP-8, and MSOP-8 plastic package. The APA4880 is capable of delivering 330mW of max. Output power to an 8Ω load with less than 10% (THD+N) from a 5V power supply. The device has been primarily developed for portable digital audio applications. Both of the depo.
• Operating Voltage
- Single Supply 3V to 7V
- Dual Supply ±1.5V to ± 3.5V
• Depop Circuitry Integrated.
• High Signal-to-Noise Ratio, 100dB
• High Slew Rate, 5.5V/ms
• Low Distortion, -66dB
• Output Power at 10% THD+N
- into 8Ω, 330mW
- into 16Ω, 200mW
• Large Output Voltage Swing
• Excellent Power Supply Ripple Rejection
• Low Power Consumption
• Short-Circuit Elimination
• Wide Temperature Range
• No Switch ON/OFF Clicks
• Available in 8 Pin SOP, TSSOP, and MSOP
Package
• Lead Free and Green Devices Available
(RoHS Compliant)
Gereral Description
The APA4880 is an integrated class AB stereo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | APA4800 |
Etc |
Stereo 290mW 8ohm Speaker Driver | |
2 | APA4800 |
ANPEC |
Stereo 290mW 8ohm Speaker Driver | |
3 | APA4835 |
Etc |
Stereo 2.8W Audio Power Amplifier with DC Volume Control and Selectable Gain | |
4 | APA4835 |
ANPEC |
Stereo 2.8W Audio Power Amplifier | |
5 | APA4838 |
ANPEC |
Stereo 2.8W Audio Power Amplifier | |
6 | APA4863 |
ANPEC |
Stereo 2.2W Audio Power Amplifier | |
7 | APA450 |
Actel Corporation |
2nd Generation Reprogrammable Flash Fpgas | |
8 | APA4558 |
Etc |
Dual Operational Amplifier | |
9 | APA4558 |
ANPEC |
Dual Operational Amplifier | |
10 | APA-104-4 |
APA |
LED | |
11 | APA-106 |
ETC |
RGB Lamp | |
12 | APA0710 |
Anpec Electronics Coropration |
1.1W Mono Low-Voltage Audio Power Amplifier |