The AP3009 is an inductor-based DC/DC converter designed to drive up to six white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain satisfied brightness. A constant frequency 1.2MHz PWM control scheme is employed in this IC, which means the tiny external components can be used. In fact, 1mm tall inductor.
·
·
·
·
·
·
·
· Inherently Uniform LED Current High Efficiency: 83% Typical No Need for Extra Schottky Diode Over Output Voltage Protection Drives 2 to 6 LEDs Fast 1.2MHz Switching Frequency Uses Tiny 1mm Tall Inductor Requires Only 0.22µF Output Capacitor
Applications
·
·
·
·
· Cellular Phones Digital Cameras LCD modules GPS Receivers PDAs, Handheld Computers
SOT-23-6
Figure 1. Package Type of AP3009
Apr. 2007 Rev. 1. 4 1
BCD Semiconductor Manufacturing Limited
Data Sheet WHITE LED STEP-UP CONVERTER Pin Configuration
K Package (SOT-23-6)
AP3009
VOUT GND FB
1 2 3
6 5 4
SW VIN CTRL
.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP3000 |
APTech |
1/4 INCH DIAPHRAGM VALVE | |
2 | AP3000A-00 |
ASI |
SILICON PIN DIODE CHIP | |
3 | AP3000C-11 |
ASI |
SILICON PIN DIODE | |
4 | AP3001 |
BCD Semiconductor |
PWM BUCK DC-DC CONVERTER | |
5 | AP3002 |
APTech |
1/4 INCH DIAPHRAGM VALVE | |
6 | AP3003 |
BCD Semiconductor |
BUCK DC-DC CONVERTER | |
7 | AP3005 |
BCD Semiconductor |
2A 420kHz PWM BUCK DC-DC CONVERTER | |
8 | AP3008 |
BCD Semiconductor |
WHITE LED DRIVER | |
9 | AP300A-00 |
ASI |
SILICON PIN DIODE CHIP | |
10 | AP3012 |
BCD Semiconductor |
STEP-UP DC-DC CONVERTER | |
11 | AP3012 |
DIODES |
1.5MHZ STEP-UP DC-DC CONVERTER | |
12 | AP3015 |
BCD Semiconductor |
MICRO POWER STEP-UP DC-DC CONVERTER |