The AP2406 is a 1.5Mhz constant frequency, slope compensated current mode PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode. It is ideal for powering portable equipment that runs from a single cell lithium-Ion (Li+) battery. The AP2406 can supply 600mA of load curre.
High Efficiency: Up to 96% 1.5Mhz Constant Switching Frequency 600mA Output Current at VIN=3V Integrated Main switch and synchronous rectifier. No Schottky Diode Required 2.5V to 5.5V Input Voltage Range Output Voltage as Low as 0.6V 100% Duty Cycle in Dropout Low Quiescent Current: 300µA Slope Compensated Current Mode Control for Excellent Line and Load Transient Response Short Circuit Protection Thermal Fault Protection <1uA Shutdown Current Space Saving 5-Pin Thin SOT23 package Typical Application Figure 1. Basic Application Circuit with AP2406 adjustable version 1 Chipown (Note 1) Abso.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP2406ES5-1.2 |
Chipown |
600mA Synchronous Step-Down Converter | |
2 | AP2406ES5-1.5 |
Chipown |
600mA Synchronous Step-Down Converter | |
3 | AP2406ES-ADJ |
Chipown |
600mA Synchronous Step-Down Converter | |
4 | AP2406 |
Chipown |
600mA Synchronous Step-Down Converter | |
5 | AP2401 |
Diodes |
2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH | |
6 | AP2401 |
BCD Semiconductor |
DUAL LDO REGULATORS | |
7 | AP2401A |
Diodes |
2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH | |
8 | AP2402 |
BCD Semiconductor |
DUAL 300mA LDO REGULATORS | |
9 | AP2411 |
Diodes |
2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH | |
10 | AP2411A |
Diodes |
2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH | |
11 | AP2420 |
Chipown |
Synchronous Step-Down Converter | |
12 | AP2422GY |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET |