The AP1515 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 1.5A load without additional transistor component. Due to reducing the number of external component, the board space can be saved easily. The external shutdown function can be controlled by logic level and then come into standby mode. The internal .
- Output voltage: 3.3V and adjustable output version - Adjustable version output voltage range, 1.23V to 18V+4% - 150KHz +15% fixed switching frequency - Voltage mode non-synchronous PWM control - Thermal-shutdown and current-limit protection - Operating voltage can be up to 22V - Output load current: 1.5A - SIP-4L Pb-Free package - Low power standby mode - Built-in switching transistor on chip - Very Low Cost Applications - Simple High-efficiency step-down regulator - On-card switching regulators - Positive to negative converter Pin Assignments General Description The AP1515 series are.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP1510 |
Anachip |
PWM Control 3A Step-Down Converter | |
2 | AP1510 |
Diodes Incorporated |
PWM CONTROL 3A STEP-DOWN CONVERTER | |
3 | AP1511 |
Anachip Corporation |
PWM Control 5A Step-Down Converter | |
4 | AP1511 |
Diodes |
PWM CONTROL 5A STEP-DOWN CONVERTER | |
5 | AP1512 |
Anachip |
2A/3A PWM Buck DC/DC Converter | |
6 | AP1512 |
Diodes |
2A/3A PWM BUCK DC/DC CONVERTER | |
7 | AP1512A |
Anachip |
2A/3A PWM Buck DC/DC Converter | |
8 | AP1512A |
Diodes |
2A/3A PWM BUCK DC/DC CONVERTER | |
9 | AP1513 |
Anachip |
PWM Control 2A Step-Down Converter | |
10 | AP1513 |
Diodes Incorporated |
PWM CONTROL 2A STEP-DOWN CONVERTER | |
11 | AP1516 |
Anachip |
3A PWM Buck DC/DC Converter | |
12 | AP1518 |
Anachip |
PWM Buck DC/DC Converter |