The AP1503 series are monolithic ICs designed for step-down DC/DC converters, and own the ability of driving a 2.5A load without additional transistor components. Due to reducing the number of external component, the board space can be saved easily. The external shutdown function can be controlle.
- Output voltage: 3.3V - 300KHz +15% fixed switching frequency - Voltage mode non-synchronous PWM control - Thermal-shutdown and current-limit protection - ON/OFF shutdown control input - Operating voltage can be up to 22V - Output load current: 2.5A - SOP-7L packages - Low power standby mode - Built-in switching transistor on chip Applications - Simple High-efficiency step-down regulator - On-card switching regulators - Positive to negative converter - DSL Modems - Portable Computers - Regulated Wall Adapters - Distributed Power Pin Assignment SOP7 with Heat Sink VIN 1 VB 2 SD 3 FB 4 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP1501 |
Anachip |
3A PWM Buck DC/DC Converter | |
2 | AP1501 |
Diodes Incorporated |
3A PWM BUCK DC/DC CONVERTER | |
3 | AP1501A |
Anachip |
5A PWM Buck DC/DC Converter | |
4 | AP1501A |
Diodes |
5A PWM BUCK DC/DC CONVERTER | |
5 | AP1505 |
ETC |
SINGLE END VOLTAGE MODE PWM CONTROLLER | |
6 | AP1506 |
Diodes Incorporated |
3A PWM BUCK DC/DC CONVERTER | |
7 | AP1506 |
Anachip |
150KHz/ 3A PWM Buck DC/DC Converter | |
8 | AP1507 |
Diodes Incorporated |
3A PWM BUCK DC/DC CONVERTER | |
9 | AP1507 |
Anachip |
3A PWM Buck DC/DC Converter | |
10 | AP1509 |
Diodes Incorporated |
2A PWM BUCK DC/DC CONVERTER | |
11 | AP1509 |
Anachip |
2A PWM Buck DC/DC Converter | |
12 | AP150X |
TE |
Traditional Aerospace Contactor |