RAM In general, RAM in Table 1 indicates the RAM start address. See Table 2 for RAM start locations for specific MCUs. For example, the RAM start address for the MC68HC908LB8 (and each MCU currently in the table) is $80. CTRLBYT The control byte (CTRLBYT) is located at RAM address RAM+$8 and is used for the ERARNGE routine. In the case of the MC68HC908LB8,.
With the exception of mask set errata documents, if any other Freescale Semiconductor document contains information that conflicts with the information in the device data sheet, the data sheet should be considered to have the most current and correct data. 1. MC68HC908QY4A Series includes MC68HC908QY4A, MC68HC908QY2A, MC68HC908QY1A, MC68HC908QT4A, MC68HC908QT2A, MC68HC908QT1A © Freescale Semiconductor, Inc., 2005. All rights reserved. Routines Supported in ROM FLASH Overview The FLASH cell used on these 0.5-µ MCUs is an industry-proven split-gate cell. The cell uses channel hot electron inj.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AN2633 |
Motorola |
LIN Drivers Application Note | |
2 | AN2633 |
STMicroelectronics |
STR91xFA low power management and power consumption Application note | |
3 | AN26 |
AMI |
CMOS Gate Array | |
4 | AN26011A |
Panasonic Semiconductor |
LNA-IC | |
5 | AN26018A |
Panasonic Semiconductor |
LNA IC | |
6 | AN26027A |
Panasonic Semiconductor |
Single band LNA-IC | |
7 | AN26065A |
Panasonic |
UMTS Triple Band LNA-IC | |
8 | AN26072A |
Panasonic |
LNA-IC | |
9 | AN2610 |
Freescale |
Choosing Components for an RF Receiver Using Romeo2 | |
10 | AN26102A |
Panasonic |
SiGe Linear Power Amplifier | |
11 | AN2611 |
Freescale |
System Considerations for Short Range RF Devices | |
12 | AN26112A |
Panasonic |
VHF/UHF amplifier |