The Am29F010B is a 1 Mbit, 5.0 Volt-only Flash memory organized as 131,072 bytes. The Am29F010B is offered in 32-pin PDIP, PLCC and TSOP packages. The byte-wide data appears on DQ0-DQ7. The device is designed to be programmed in-system with the standard system 5.0 Volt VCC supply. A 12.0 volt VPP is not required for program or erase operations. The device ca.
of the Am29F010 and Am29F010A. The standard device offers access times of 45, 55, 70, 90, and 120 ns, allowing high-speed microprocessors to operate without wait states. To eliminate bus contention the device has separate chip enable (CE#), write enable (WE#) and output enable (OE#) controls. The device requires only a single 5.0 volt power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. The device is entirely command set compatible with the JEDEC single-power-supply Flash standard. Commands are written to.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AMD27C256 |
Advanced Micro Devices |
256 Kilobit (32/768 x 8-Bit) CMOS EPROM | |
2 | AMD27C64 |
Advanced Micro Devices |
64 Kilobit (8192 x 8-Bit) CMOS EPROM | |
3 | AMD-645 |
AMD |
Peripheral Bus Controller | |
4 | AMD-750 |
AMD |
Chipset | |
5 | AMD-751 |
AMD |
System Controller Revision Guide | |
6 | AMD-761 |
AMD |
System Controller Software/BIOS Design Guide | |
7 | AMD-762 |
AMD |
System Controller | |
8 | AMD-766 |
AMD |
Peripheral Bus Controller | |
9 | AMD-8131BLC |
AMD |
Hyper Transport PCI-X Tunnel | |
10 | AMD-K6 |
Advanced Micro Devices |
AMD-K6 Processor | |
11 | AMD-K6-2E |
AMD |
Embedded Processor | |
12 | AMD-X5 |
AMD |
Microprocessor |